Shandong speed scale _ Liaoning speed scale manufacturers _ Supply manufacturers _ how much money _ Which is good _ Model parameters _ Inner Mongolia _ Qinghai _ Gansu _ Xinjiang _ Hunan _ Hubei [Changtai Electrical and Mechanical Services]

Company Products

Speed scale

Speed ?? scale is a collection of transport, weighing weighing and quantitative control as one of the high-tech products. Can be continuous, uniform and accurate on the block, granular, powder material dynamic control, quantitative feeding, continuous weighing. With the microprocessor, actuators and sensors to complete the series of closed-loop control. Widely used in building materials, cement, mining, coal, highway, metallurgy, chemical, power and other industrial occasions.

Body structure features:

(1) the rotation part of the Schenk said that the special motor, so that it directly with the body of the spindle link, eliminating the mechanical vibration of its impact on the weighing.

(2) the use of skirt belt, greatly enhance the application life.

(3) the use of high-precision force parallel beam sensor, eliminating the uneven distribution of the belt on the belt and the longitudinal friction caused by the impact of weighing are not allowed.

Specifications Matching table:

Serial number	Specifications Model	Flow range (t / h)	Belt width (mm)	Recommended tonnage (t / h)
1	CTDL0317	0.02-0.5	350	0.04-0.40
2	CTDL0517	0.08-0.8	500	0.16-0.64
3	CTDL0520	0.1-4.0	500/650	0.20-3.50
4	CTDL0620	0.60-10	650	1.20-9.00
5	CTDL0820	2.0-40	800	4.00-36
6	CTDL1020	6.0-100	800/1000	12-90
7	CTDL1220	16-160	1000/1200	32-144
8	CTDL1225	20-300	1200/1400	40-270
9	CTDL1427	35-450	1400/1600	70-405
10	CTDL1430	40-500	1400/1600	80-450
11	CTDL1630	60-600	1600	120-540
12	CTDL1830	80-800	1800	160-720
13	CTDL2030	100-1200	2000	200-1080

Technical Parameters:

parameter name	Technical Parameters
Static weighing error	≤ ± 0.25%
Dynamic cumulative error	≤ ± 0.5%
Control error	≤ ± 0.5%
Zero value stability	≤0.0018% Cmax
Repeatability	≤0.05%
Linearity	≤0.05% F · S
Partial load factor	≤0.08%
Leakage current	≤ 10mA
Insulation resistance	> 500
Belt width (mm)	Lt; / RTI & gt;
Master from the center of the roll	1700,2000,2700mm, may be non-standard
Weighing section length	800mm-1200mm
Repeat the signal	0-20mA / 4-20mA
Speed signal	1.0Hz-5.0KHz